1) Connect the tester to the monitor or projector cable, the red LED should be on. 2) Allow the monitor or projector to warm up for a few minutes. 3) Press the selector button and observe the displayed patterns. (The las - Cable tester - Document - PDFSEARCH.IO

First Page	Meta Content
	1) Connect the tester to the monitor or projector cable, the red LED should be on. 2) Allow the monitor or projector to warm up for a few minutes. 3) Press the selector button and observe the displayed patterns. (The las Add to Reading List Document Date: 2009-03-29 16:25:46 Open Document File Size: 482,50 KB Share Result on Facebook City Blairstown / / Event Product Issues / / Facility Footbridge Lane / / / / Position incorrect video driver / / Product video board / / ProvinceOrState New Jersey / / URL http / SocialTag Television Electronic engineering Video signal Digital imaging Graphics hardware Video Graphics Array Super video graphics array NTSC Display resolution Television technology

1) Connect the tester to the monitor or projector cable, the red LED should be on. 2) Allow the monitor or projector to warm up for a few minutes. 3) Press the selector button and observe the displayed patterns. (The lasAdd to Reading List