Elecraft

Results: 114



#Item
41

Installation Instructions

Add to Reading List

Source URL: www.elecraft.com

Language: English - Date: 2005-04-27 20:00:00
    42

    Yaesu FTSeries radios with KPA/KAT500 Power Combo The Yaesuseries radios can be connected to the KAT/KPA500 combo using the Key signal available on the rear panel of the rig. On these Yaesu radios, the

    Add to Reading List

    Source URL: www.elecraft.com

    Language: English - Date: 2017-02-01 16:39:53
      43

      Yaesu FT-950 and FT-450D with KPA/KAT500 Power Combo The Yaesu FTdx1200, FT-450D and FT-950 series radio can be connected to the KAT/KPA500 combo using the Key signal available on the rear panel of the linear and tuner.

      Add to Reading List

      Source URL: www.elecraft.com

      Language: English - Date: 2017-02-01 16:45:33
        44

        ELECRAFT Application Note Operating on 630M with the K3S and K3 Revision A1, October 2017 Copyright © 2017, Elecraft, Inc.; All Rights Reserved

        Add to Reading List

        Source URL: www.elecraft.com

        Language: English - Date: 2017-10-13 00:20:20
          45

          K3/K3S Integration with KPA500 and KAT500: Set Up and Configuration This Application Note can be used as a checklist of steps to ensure that the K3/K3S and KPA500 plus KAT500 combo are optimized for operation. While all

          Add to Reading List

          Source URL: www.elecraft.com

          Language: English - Date: 2017-01-31 16:39:48
            46

            Application Note: K3 Hardware AGC Modification (Thru-hole) by: Wayne Burdick (N6KR), John Grebenkemper (KI6WX), and Bob Friess (N6CM) v1.6 27 March 2008 THIS SET OF MODIFICATIONS SHOULD BE PERFORMED ONLY BY SOMEONE EXPER

            Add to Reading List

            Source URL: www.elecraft.com

            Language: English - Date: 2008-03-26 20:00:00
              47

              Microsoft Word - K3ALCMod.doc

              Add to Reading List

              Source URL: www.elecraft.com

              Language: English - Date: 2009-02-18 19:00:00
                48

                PX3 FAQ Release version 0.8 Installing Firmware QUESTION: What is the best way to update the firmware in the PX3? Answer: Where possible please connect the KXUSB cable directly to the PX3. This ensures that the file

                Add to Reading List

                Source URL: www.elecraft.com

                Language: English - Date: 2014-10-06 20:00:00
                  49

                  ELECRAFT KPA1500 1500-WATT AMPLIFIER OWNER’S MANUAL Revision A8, March 5, 2018 E740301

                  Add to Reading List

                  Source URL: www.elecraft.com

                  Language: English - Date: 2018-03-05 18:14:04
                    50

                    Yaesu FTdx3000 with KPA/KAT500 Power Combo The Yaesu FTdx3000 series radio can be connected to the KAT/KPA500 combo using the Key signal available on the rear panel of the linear and tuner. On these Yaesu radios, the key

                    Add to Reading List

                    Source URL: www.elecraft.com

                    Language: English - Date: 2017-02-03 22:09:24
                      UPDATE