UKC Key, Section B; Performing Operations

First Page		Document Content
Date: 2008-05-02 11:16:45 Pliers Clamp C-clamp Chuck Wrench Tongs Tweezers Tool Vise Technology Metalworking hand tools Humanâ€“machine interaction		UKC Key, Section B; Performing Operations Add to Reading List Source URL: www.ipo.gov.uk Download Document from Source Website File Size: 22,77 KB Share Document on Facebook

	Sette 270, 270W Fuse Replacement Tools Needed: T-10 Torx (CAN USE 2mm hex key provided in shim kit that is included with the grinder), Phillips Screw driver, Pliers (not necessary), Fuse* *For 120v units: T3.15A250v Fus DocID: 1vogA - View Document
	68-Pliers, Tacking Irons, Hot Press_05-Lam Film, Tkg Irons, Hot Press2.qxd DocID: 1uc6o - View Document
	GB2.0 Installation Tools Needed: #2 Flathead screwdriver, #2 Philips screwdriver, 5mm allen key, hammer, 10mm and 13mm wrench, pair of Vise-grips and a pair of pliers, and a 5/8 or comparable socket Remove the case (see DocID: 1tYvN - View Document
	SideKX PX3 Installation TOOLS REQUIRED: #1 Phillips Screwdriver, plastic coated pliers, or small spanner wrench, and a 10mm Socket or nut-driver DO NOT USE an ADJUSTABLE WRENCH or an OPEN END WRENCH, Loosen the 4 knurle DocID: 1tL11 - View Document
	Crushing Pliers Lighter Mobile Flux Extractor DocID: 1thCn - View Document